How Much Do Replacement Windows Cost in Yorkshire?

A "from £299" window price tells you almost nothing. The same opening can be filled with a standard uPVC casement or a bespoke steel-look aluminium frame with slim glazing bars, and the difference is several times over. Size, glass, colour and the condition of the opening change the figure again.

What we can give you is the scale of project you are likely to be looking at, so you know whether you are planning for a few thousand pounds or a five-figure investment before you ask anyone to survey.

A few thousand pounds — a small number of uPVC windows, or a single door, in straightforward openings with good access.

£10,000–£20,000 — a typical whole-house replacement in uPVC, or a smaller house in flush casements or vertical sliders from the Residence Collection.

£20,000–£40,000 — whole-house aluminium, heritage steel-look aluminium or timber-alternative sash projects, particularly on stone houses with many openings, or a mixed windows-and-doors scheme.

£40,000 and above — architectural aluminium: large sliding doors, wide bifolds, full-height glazing, barn conversions and self-builds with 25+ openings. Our West Yorkshire self-build (32 windows, 4 doors) sits in this category.

These bands are indicative only, include typical installation and are not a quotation. Your figure is confirmed after survey against a written specification.

Number and size of windows — larger projects spread survey, delivery and set-up costs, so the cost per window usually drops a little as the number rises. Size matters more than count: one large picture window can cost more than three small casements.

Material — uPVC is generally the most economical; flush casement and timber-alternative uPVC sit above standard uPVC; aluminium and heritage steel-look aluminium sit above that.

Opening configuration — fixed panes cost least; casements, tilt-and-turn, vertical sliders and large sliding or bifold doors progressively more.

Glass — standard double glazing versus triple glazing, acoustic, toughened or laminated safety glass, obscure glass and solar control all change the figure.

Colour and finish — white is standard; foiled colours, dual colour (different inside and out) and specific RAL colours add cost.

Standard versus bespoke — arched heads, shaped frames, slim glazing bars and matched heritage detailing cost more than standard rectangular frames.

Removal and disposal — taking out old frames and making good is normally included; removing old steel frames set into stone, or rotten timber subframes, takes longer.

Access — upper floors over conservatories, steep sites, narrow lanes and scaffold requirements add time.

Stone houses rarely have square, identical openings. Reveals are deep, mullions and stone surrounds need protecting, and every window is made to measure. Fitting into stone takes more care than fitting into a modern brick opening, and that labour is reflected in the quotation.

If stone repairs, new lintels or altered openings are needed, those are separate building works and are priced or excluded clearly.

Heritage-sensitive products — slim sightlines, putty-style glazing, correct bar profiles, sashes that match original proportions — cost more than standard frames. In conservation areas, Article 4 areas, the Yorkshire Dales National Park and on listed buildings, the product may also need to be approved before ordering, which adds time and sometimes drawing work.

Listed building consent can mean timber or specialist products are required; in that case we will tell you if our range is not the right answer rather than quote something that won't be approved.

Aluminium usually costs more than uPVC for the same opening. You are paying for slimmer frames, larger possible panes, a wider colour range and a very long service life. On a small cottage window the visual difference can be modest; on a large opening or a contemporary elevation it is significant. Many Yorkshire projects mix the two: flush casements to the front, aluminium sliding doors to the rear extension.

Send us photographs of each elevation, a rough count of windows and doors, and drawings if you have them. From that we can usually give an initial budget view and tell you which band the project is likely to fall into, before anyone visits. The final price is confirmed after a measured survey.